Skip to main content
Home
Services
Engineering Consultancy
Custom Electronics Design (R&D)
Firmware & Connected Software
Electrical Diagnostics & Support
Products
Marine Solar Charger
Wireless CAN Bridge
Schematic Digitiser (Free Beta)
Blog
Power Electronics
CAN Bus & Connectivity
Embedded Design
Publications
About Us
Contact Us
Register Interest
Open Menu
Home
Services
Engineering Consultancy
Custom Electronics Design (R&D)
Firmware & Connected Software
Electrical Diagnostics & Support
Products
Marine Solar Charger
Wireless CAN Bridge
Schematic Digitiser (Free Beta)
Blog
Power Electronics
CAN Bus & Connectivity
Embedded Design
Publications
About Us
Contact Us
Register Interest
Three minutes, so we can scope properly
Project Enquiry
Tell us about your project, installation, or the problem you're troubleshooting.
Your name
Company or organisation
Your role
Work email
Phone (optional)
What do you need from MicroCore?
Please choose...
Engineering consultancy, architecture, MCU/MPU selection, power budgeting
Custom electronics design, schematic and PCB layout
Firmware development, bare-metal, RTOS, or Embedded Linux
Diagnostics and fault-finding on existing hardware
EMC compliance, pre-testing or remediation
Firmware or design review, fixed scope
Product enquiry, Marine Solar Charger or Wireless CAN Bridge
Something else, described below
Not sure yet, would like help working it out
What stage is the project at?
Please choose...
Concept, no hardware yet
Specification or architecture in progress
Schematic or design in progress
Prototype exists, not working as intended
Prototype works, preparing for production
In production, needs a fix or revision
Legacy product, needs support or a redesign
Other, described below
What already exists?
Please choose...
Nothing yet, starting from requirements
A written spec or requirements document
A schematic
A schematic and PCB layout
Working prototype hardware
Hardware plus firmware already in the field
An existing product from another supplier
Other, described below
When does this need to be underway?
Please choose...
Immediately, this is blocking us
Within the next month
Within the next quarter
Six months or more out
Planning and budgeting only at this stage
Tied to a date or milestone, described below
Expected production volume
Please choose...
One-off or internal tool
Under 100 units per year
100 to 1,000 units per year
1,000 to 10,000 units per year
Over 10,000 units per year
Not a product, a service or diagnostics engagement
Other, described below
Indicative budget for this stage of work
Please choose...
Under NZ$5,000
NZ$5,000 to NZ$15,000
NZ$15,000 to NZ$40,000
NZ$40,000 and above
Not yet determined, need help scoping
Different structure, my range or cap is described below
Does the product need to meet a compliance standard?
Please choose...
No formal compliance requirement
EMC, RCM, FCC or EN 55032 or equivalent
Automotive, AEC-Q or ISO 16750
Marine, IP67 or NMEA 2000 certification
Agricultural, ISOBUS (ISO 11783)
Medical, rail, or other regulated sector
Another standard, named below
Not sure, needs assessment
Describe the project, and anything the dropdowns did not cover
This project requires an NDA before technical detail is shared
Send Project Enquiry
